Rockwell Automation 1771-DBMEM1,1771-DBMEM2 INSTL.INST EEPROM MEMORY MOD. - Manual (Page 2)

Installation Instructions
EEPROM Memory Module
2
Follow these instructions to install your memory module.
1. Remove the BASIC module from the I/O chassis.
2. Disassemble the BASIC module to gain access to the memory
module sockets.
ATTENTION: Electrostatic discharge can damage integrated
circuits or semiconductors in the module of you touch
backplane connector pins. Wear a wrist-strap grounding device
and use a static-safe workstation, if available.
20371-M
SKT1
3. Insert the memory module into SKT1.
4. Reassemble the BASIC module.
Install the Memory Module