Rockwell Automation 1734-EP24DC Point I/O Expansion Power Supply Installation Instructions - Manual (Page 16)

16 POINT I/O 24V dc Expansion Power Supply
Publication 1734-IN058B-EN-P - June 2005
Specifications
1734-EP24DC POINT I/O 24V dc Expansion Power Supply
Specification Value
I/O Module Capacity 4-17 modules, depending on current rating of each module
Input Voltage Rating 24V dc nominal
10…28.8V dc range
Field Side Power
Requirements 24V dc (+20% = 28.8V dc maximum) @ 400 mA maximum
Inrush Current 6 A maximum for 10 ms
Indicators 1 Green Field Power Status Indicator
1 Green 5V System Power Indicator
POINTBus Output Current Horizontal mounting -
1 A at 10…19.2V input;
1.3 A at 19.2…28.8V input
Vertical mounting -
1 A at 10…28.8V input
Input Overvoltage Protection Reverse polarity protected
Interruption Output voltage will stay within specifications when input
drops out for 10ms at 10V with maximum load.
Module Location Between I/O modules in 1734 system
Breaks field power bus
Limitations Use with POINT I/O Adapters only
Dimensions millimeters
inches 76.2H x 25.4W x 133.4L mm
(3.00H x 1.00W x 5.25L in)
Weight 0.12 kg (0.27 lb)
Terminal Base Screw Torque 0.6 Nm (7 lb-in)