Rockwell Automation 1732D-8I8O1212D DNet ArmorBlock Network Powered 8-input/8-output Module IN - Manual (Page 9)

DeviceNet ArmorBlock Network Powered 8-input/8-output Module 9
Publication 1732D-IN010A-EN-E - April 2009
Connect the I/O Cord Sets to the Module
The ArmorBlock DeviceNet family has 5-pin micro-style connectors.
We provide caps to cover the unused connectors on your module.
Connect the quick-disconnect cord sets that you selected for your module to
the appropriate ports.
Network Connector
Refer to the pinout diagram for the network connector.
M12-style Input Connectors
I/O Connector
Refer to the pinout diagram for the I/O connector.
M12-style 5-pin Female Input Connector
Male Female
(View into Connector)
Pin 1 Drain
Pin 2 V+ (Red)
Pin 3 V- (Black)
Pin 4 CAN_H (White)
Pin 5 CAN_L (Blue)
41452 44175
(View into Connector)
Pin 1 Sensor Source Voltage
Pin 2 Output
Pin 3 Return
Pin 4 Input
Pin 5 PE
41452