Rockwell Automation 1790-XXXX Digital Expansion D-Shell CompactBlock LDX I/O - Manual (Page 2)

2
Publication 1790-IN003A-EN-P - April 2001
European Union Directive Compliance
If this product has the CE mark, it is approved for installation
within the European Union and EEA regions and it has been
designed and tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following
standards, in whole or in part, documented in a technical
construction file:
•
EN 50081-2 EMC - Generic Emission Standard, Part 2 -
Industrial Environment
•
EN 50082-2 EMC - Generic Immunity Standard, Part 2 -
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN
61131-2 Programmable Controllers, Part 2 - Equipment
Requirements and Tests. For specific information required by
EN 61131-2, see the appropriate sections in this publication, as
well as the Allen-Bradley publication Industrial Automation
Wiring and Grounding Guidelines, publication 1770-4.1.
Open style devices must be provided with environmental and
safety protection by proper mounting in enclosures designed
for specific application conditions. See NEMA Standards
publication 250 and IEC publication 529, as applicable, for
explanations of the degrees of protection provided by
different types of enclosures.