Rockwell Automation 2711E-ND7 PanelView 1200/1400e Transfer Utility - Manual

1 Publication 2711e-IN001A-EN-P - October 2001
Installation Instructions
2711E-ND7 PanelView 1200/1400e Transfer
Utility
The purpose of this package is to allow the upload and download of
files for PV”e”, and/or PV1200 terminals. This can be accomplished on
computers with various Windows™ operating systems, and drivers
including RSLinx, Interchange, and WinLinx.
Software Included Within
This Package FTU32 (Version 5)
A 32-bit PV”e”, upload/download program that is designed to be used
on computers with Windows 95/NT/2000 operating systems along
with RSLinx drivers. (This is designed to be used on the same
computer with RSLogix 5/500/5000 PLC/SLC/ControlLogix
development software.) To install, run FTU_V5\Disk1\Setup.exe. For
additional information, see Readme.txt in FTU_V5 directory and/or
publication 2711E-UM003B-EN-P.
RSLinx Lite (On separate CD)
These drivers are required to perform file transfers over ControlNet,
DeviceNet, DH+, or EtherNet I/P from a computer running Windows
NT or Windows 2000 and will work with Windows 9x.
FTU (Version 3)
A 16-bit PV1200 and PV”e” upload/download program that is
designed to be used on computers with Windows 3.1 or Windows 95
operating systems along with Interchange or WinLinx drivers. (This
can be used on the same computer with 6200 and AI Series software
packages.) To install, run FTU_V3\Disk1\Setup.exe. For additional
information, see Readme.txt in FTU_V3 directory and/or publication
2711E-UM003B-EN-P.
TIP
In all cases, the associated PanelBuilder software is
used to save the file in a downloadable format
(*.pvd for PV”e” and *.cfg for PV1200) before the
download utility is used.