Rockwell Automation 2090-CFxxx Standard Feedback Cables with SpeedTec DIN Connector Type 623 - Manual

Installation Instructions
Standard Feedback Cables with
SpeedTec DIN Connector Type 623
Catalog Number 2090-CFBM7DD-CEAAxx, 2090-CFBM7DF-CEAAxx
About Standard Feedback Cables
Standard motor feedback cables have a 23 mm (0.9 in.) SpeedTec DIN connector at the motor
end, and a D-sub connector or flying leads at the drive end. These cables can be bent or reformed
during installation or maintenance, but should not be used in a continuous flex operation.
Topic Page
Important User Information 2
Before You Begin 3
Install Cables 4
Schematics and Connector Pinouts for Cables 5
Specifications 7
Additional Resources 8