Rockwell Automation 2711-KTUY2KF PV 1200 Serial Firmware Upgrade Utility - Manual (Page 7)

PanelView 1200 Series F and G 7
Touch Screen Terminal with Keypad Firmware
If you downloaded keypad firmware to a touch screen terminal:
1. Power up the terminal, if the terminal powers up in:
– Run mode, then switch to Configure mode.
– Configure mode, press the touch cell at Column 4, Row 9. This clears
the error message.
2. Press the touch cell at Column 2, Row 5.
3. Restart the touch screen firmware download at the DOS prompt by
entering either command:
UPGRADE TOUCH COM1
UPGRADE TOUCH COM2
Column 4, Row 9
Column 2, Row 5