Rockwell Automation 2706 DL20 SERIES G USER MANUAL - Manual (Page 98)

Chapter 8
Special Functions
8–10
For example, to set the clock to 1:34 pm you would answer Yes to the SET
CLK? prompt. You are prompted to enter a year.
YR:93
Enter the correct year and press [Return]. You are prompted for a month.
MONTH:2
Enter the correct month and press [Return]. You are prompted for a day of
the week.
DAY:4
Enter a value 1 through 7 where 1 = Sunday and 7 = Saturday and press
[Return]. You are prompted for a format?
24 HOUR FORMAT?
Enter [N] and press [Return] to select 12 hour format. You are prompted for
an hour:
HR: 12
Enter [1] [Return] to set the new hour. You will be prompted for AM or PM.
AM? N
Enter [N] and press [Return] to select PM. You are prompted for the minute.
MIN: 59
Enter 34 and press [Return]. You are prompted for the seconds.
SEC: 26
Look at the clock you are using to set the time and enter the current seconds
plus an additional 15 seconds. When the time is exactly as set, press
[Return]. The DL20 continuously displays the time until you press [Esc].
You can also set the clock using special messages #12 and #13 as described
in Chapter 5.
Important: Once you begin setting the clock, you must finish. Pressing
[Esc] does not exit the function.
Real Time Clock Functions