Rockwell Automation 2093-PRSxx Kinetix 2000 Power Rail Installation Instructions - Manual (Page 3)

Kinetix 2000 Power Rail 3
Publication 2093-IN004A-EN-P - December 2006
Before You Begin
Remove all packing material, wedges, and braces from within and around the components.
After unpacking, check the item name-plate catalog number against the purchase order.
Kinetix 2000 Power Rail Box Contents
Dimensions
Mounting dimensions for the Kinetix 2000 power rail are shown in the figure and table below.
Kinetix 2000 Power Rail Approximate Dimensions
Drive Component Ships With
Power Rail • One braided 100 mm (3.9 in.) ground strap
• This manual, Installation Instructions, publication 2093-IN004.
IMPORTANT
To improve the bond between the power rail and subpanel, construct your
subpanel out of zinc plated (paint-free) steel.
C
32.66
(1.29)
A
B
45
(1.77)
167.5
(6.59)
76.0
(2.99)
15.1
(0.59)
M4 Mounting Screws
2093-PRS8S
Dimensions are in millimeters (inches).