Rockwell Automation 2706 DL40 Plus Faceplate Repair Kit - Manual

41061-095-01(A)
Instructions
DL40 Plus Faceplate Repair Kit
Part No. W77156-800-01 (2-Line DL40 Plus)
W77156-800-02 (4-Line DL40 Plus)
W77156-800-03 (2-Line DL40 Plus Slave)
W77156-800-04 (4-Line DL40 Plus Slave)
DL40 Plus Message Display (2706-LV2x, -LV4x)
1 2
3
Remove four screws securing top circuit board. Disconnect ribbon cable from circuit
board below. Place board in a safe anti-static area.
Important: Note location of ribbon cable. Remove ribbon cable by the connector, do not
pull on the cable. The ribbon cable has a small latch in the middle that must be pressed in
to release the cable connector from the circuit board connector.
Remove four screws and back cover.