Rockwell Automation 6189V-xxxx Non-display Industrial Computers User Manual - Manual (Page 42)

42 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014
Chapter 4 Component Replacement
6. Return the HDD assembly into its bay (G).
7. Tighten the two captive thumbscrews of the drive assembly to secure it to
the computer (H).
8. Follow the steps for Post-configuration on page 37 .
Replace or Add
Memory Modules The motherboard of the 750R and 1450R computers has four DIMM slots that
support up to 32 GB maximum system memory.
Figure 11 - Memory Module Slots and Module Alignment
H
G
H
H
G
H
750R Computer 1450R Computer
IMPORTANT When you install memory in pairs, install modules in slots 1 and 3 or slots 2
and 4 for optimal performance.
4
Lock Lever
Keyed Surface
of DIMM Slot
1 2 3