Rockwell Automation 6189V-25HDDSA Replacing Hard Disk Drive Shock Mounting Strips - Manual

1 Publication 6181P-IN005A-EN-P
Installation Instructions
Shock Mount Strips for Hard Disk Drive
VersaView 6181P (1500P/1700P) Integrated Display Computers
Catalog No. 6189V-25HDDSA
This document shows how to replace the hard drive gaskets in 6181P 15"
and 17" Industrial Computers.
Safety Precautions Observe the following precautions when working with the computer’s hard
disk drive:
• Do not touch internal components unnecessarily.
• Always handle the hard disk drive by its metal frame.
• Store the hard disk drive in an anti-static bag when it is not installed.
• Never disconnect or install a hard disk drive with the power turned on.
The Hard Drisk Drive Shock Mount Strips Kit (6189V-25HDDSA)
consists of:
• 2 shock mount strips
• 4 flat head screws
• 2 pan head screws
ATTENTION
!
Failure to follow proper safety procedures could result in
severe electrical shock or damage to the VersaView 6181P
Integrated Display Computers.
ATTENTION
!
ESD can damage the computer and components. Make
sure you work in a static-safe environment and wear a
grounding strap whenever handling circuit boards, hard
disk drive or other internal components.
ATTENTION
!
Mechanical shock can damage a hard drive. Do not drop or
bump the drive.