Rockwell Automation 6189V-25HDDSA Replacing Hard Disk Drive Shock Mounting Strips - Manual (Page 4)

Publication 6181P-IN005A-EN-P - February 2004 4 PN 41061-343-01(1)
Copyright © 2004 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
To install the hard disk drive:
1. Place one of the rubber shock mount strips into the bottom hard disk
drive bracket.
2. Place the hard disk drive into the bottom hard disk drive bracket so that
it fits inside the rubber shock mount strip.
3. Place the other rubber shock mount strip evenly around the top edge of
the hard drive.
4. Place the top hard disk drive brackets on top of the hard drive and shock
mount strip.
5. Fasten the hard disk drive assembly to the chassis with 4 screws.
6. Reinstall the back cover.