Rockwell Automation 7000 PowerFlex AC Drive with Direct-to-Drive Technology - Manual (Page 12)

8 Re-installing a Separately Shipped Common Mode Choke (CMC) • Installation Instructions
Publication 7000-IN003B-EN-P – June 2013
Installing the CMC (cont.) Connect the four power cables (designated M+, M-, L+, and L-) in the
CMC Cabinet to the identically designated cable termination lug pads on
the CMC (see Figures 10 and 15).
Figure 10 – CMC power cable orientation
Connect the green ground cable lug to the ground connection bolt on
the base of the CMC (see Figure 11).
Figure 11 – Ground Cable Termination