Rockwell Automation 7000 PowerFlex AC Drive with Direct-to-Drive Technology - Manual (Page 13)

Re-installing a Separately Shipped Common Mode Choke (CMC) • Installation Instructions 9
Publication 7000-IN003B-EN-P – June 2013
Connect the thermistor cable to the connection terminal assembly (see
Figure 12).
Figure 12 – Thermistor terminal blocks and connection cable
Two clear plastic Air Baffles (to optimize airflow through the CMC) will
be supplied. These mount horizontally and are placed on top of four (4)
white metal baffle supports that attach around the perimeter of the CMC
Cabinet (see Figure 13). They are secured when the retaining brackets are
placed on top of the baffles and affixed with taptite screws.
NOTE: The rear baffle support must be removed before installing the
CMC.