Rockwell Automation 2711-NC2 PanelView Remote Keyswitch/RS-232 Port Assembly - Manual (Page 2)

Remote Keyswitch and RS-232 Assembly
Installation Data
2
The Remote Keyswitch and RS-232 Port Assembly package includes the
following:
1 main assembly (housing and cable)
4 mounting screws
4 washers
2 keys
1 protective screw-on cap and 1 chain
1 instruction sheet
Figure 2
Remote Keyswitch and RS-232 Port Side View
20161a
User’s Panel
Gasket
Housing
10’ (3 m) Cable
.525”
(13.3 mm)
.525”
(13.3 mm)
Outisde Face of
User’s Panel
Washer
Screw
3.00”
(76.2 mm)
3.25”
(82.6 mm)
1.35”
(34.3 mm)
To install the Remote Keyswitch and RS-232 Port Assembly, follow the
steps below. Refer to Figure 3 for dimensions.
1. Make a cutout in the panel door, and drill four mounting holes. Ensure
the four holes are free of burrs.
Parts Included
Installing the Remote
Keyswitch Assembly