Rockwell Automation 6189V-HPMOUSEP Panelmount Industrial Pointing Device - Manual (Page 3)

3
Publication 6189-IN001C-EN-P - October 2007
Overview
This document describes installation of the 6189V-HPMOUSEP Panelmount
Industrial Pointing Device including how to install the 6189V-HPMOUSEP in a
panel using mounting studs.
Mounting Hardware
The 6189V-HPMOUSEP is shipped with the following mounting hardware:
Tools Required
In addition to the tools required to make the cutout, you will need the following
tools:
•
3/8 inch socket
•
6 inch (15 cm) extension rod (minimum)
•
Socket driver (in/lb. torque wrench recommended)
•
Ruler
Item Description Quantity Use For
Self-locking nuts 8 Panel or enclosure mounting