Rockwell Automation 1798-PFTP1 FlexArmor PROFIBUS Field Termination Plug User Manual
Page 3
FlexArmor PROFIBUS Field Termination Plug 3
Publication 1798-IN005B-EN-P - April 2002
IMPORTANT
Identifies information that is critical for
successful application and understanding of the
product.
ATTENTION
!
Environment and Enclosure
This equipment is intended for use in a
Pollution Degree 2 industrial environment, in
overvoltage Category II applications (as defined
in IEC publication 60664-1), at altitudes up to
2000 meters without derating.
This equipment is considered Group 1, Class A
industrial equipment according to IEC/CISPR
Publication 11. Without appropriate precautions,
there may be potential difficulties ensuring
electromagnetic compatibility in other
environments due to conducted as well as
radiated disturbance.
This equipment is supplied as "enclosed"
equipment. It should not require additional
system enclosure when used in locations
consistent with the enclosure type ratings stated
in the Specifications section of this publication.
Subsequent sections of this publication may
contain additional information regarding specific
enclosure type ratings, beyond what this
product provides, that are required to comply
with certain product safety certifications.
See NEMA Standards publication 250 and IEC
publication 60529, as applicable, for
explanations of the degrees of protection
provided by different types of enclosure. Also,
see the appropriate sections in this publication,
as well as the Allen-Bradley publication 1770-4.1
("Industrial Automation Wiring and Grounding
Guidelines"), for additional installation
requirements pertaining to this equipment.