Rockwell Automation 2727-MRC1 MobileView Download Cable Installation Instructions - Manual (Page 3)

Publication 2727-IN003B-MU-P
Installation Instructions
MobileView Download Cable
(Catalog Number 2727-MRC1)
English
The MobileView Download Cable (2727-MRC1) is an accessory for the following
MobileView terminals:
• MobileView Machine Terminal MT750
• MobileView Guard G750 Machine Terminal
Cable Overview
The 4 meter (13.12 foot) download cable is used with Boot-Loader software to
download software to the MobileView MT750/G750 terminals. It can also be used
with Active-Sync software to transfer data to and from your computer.
Download Cable Pinout Description
1
2
4
5
Tx
Rx
Gnd
3
5
9
MobileView
Serial Port S2 Connector
(female)
MobileView
10-pin Latch
(male connector)
PC
9-pin DSUB
(female connector)
2
10
1
9
1*
7*
2* 6
3
To To
ActiveSync
ActiveSync
ActiveSync
1
9
Ader 1
4 meter (13.2 foot)
1
PC 9-pin
(male connector)
1
* Pins 1, 2 and 7 are connected together on the CPU board in the MobileView terminal. They are
used for the ActiveSync signal. If you make your own cable, do not elimiate these 3 wires.