Rockwell Automation 2727-MRC1 MobileView Download Cable Installation Instructions - Manual (Page 4)

2 MobileView Download Cable
Publication 2727-IN003B-MU-P
Removing the Back Cover of the MobileView Terminal
Connecting the MobileView MT750 or G750 Terminal to your PC
The following illustration shows how the MobileView Download Cable connects between the
RS-232 Serial Port of the MobileView terminal and the serial COM port on your computer.
ATTENTION
!
Turn off the power supply before removing the back cover of
the MobileView terminal.
When the back cover is removed, the MobileView terminal is
sensitive to electrostatic discharge.
Refer to User Manual for securing back cover to the terminal.
1. Place the terminal on a stable,
flat surface.
2. Remove the 6 screws that
secure the back cover to the
terminal.
3. Carefully lift off the back cover
and place on secure surface.
Back Cover Screws
Back Cover
Et
her
ne
t
S4
B5
B4
B2 B6 B3
Serial
port R eset
S6
,
COM
-Mo
d u l
S1
9
AABBC C D D EEFF 00:60:B5:06:00:01 2250-00001
RS-232 Serial Port
Assigned to COM2 Serial Port
Download Cable
2727-MRC1
4 meter (13.12 foot)
COM2 Serial Port
Pin 1