Rockwell Automation 2364F DC Link Fuse Upgrade Kit for RGU Parallel w/ NRU - Manual (Page 11)

DC Link Fuse Upgrade Kit for RGU in Parallel with NRU 11
Testing
•
Energize the unit
•
Remove wire 117 or 119 from the coil of the relay. Use caution when
handling energized wires!
•
The unit should stop modulating and indicate a fault
•
De-energize the unit
•
Replace the wire
•
Re-energize the unit
Make Mark-Ups Use a red pen to add circuitry to copies of drive system schematics. Leave
one copy of marked-ups on site.
The mark-ups should indicate the number of the kit (the part number shown
in tables on pages 1 or 2) used for the upgrade.
Send Mark-Ups To
Headquarters Send one copy of the mark-ups to Drive Systems headquarters.
Attention: Robert VanLieshout
Allen-Bradley Drive Systems
6400 West Enterprise Drive
Mequon, WI 53092
Allen-Bradley Drive Systems will use these mark-ups to provide “as
installed” drawings to customers.
Allen-Bradley Drive Systems will also use the receipt mark-ups to track
which sites have received the update.