Rockwell Automation 1799-D10U10BL 10 Input/10 Output Discrete Embedded I/O - Manual (Page 2)

2 10 Input/10 Output Discrete Embedded I/O Boards
Publication 1799-IN003B-EN-P - December 2000
European Communities (EC) Directive Compliance
If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following standards,
in whole or in part, documented in a technical construction file:
•
EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial
Environment
•
EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers,
Part 2 - Equipment Requirements and Tests. For specific information
required by EN 61131-2, see the appropriate sections in this publication, as
well as the Allen-Bradley publication Industrial Automation Wiring and
Grounding Guidelines For Noise Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be mounted in
an enclosure during operation to provide safety protection.
ATTENTION
!
Before handling this board, be certain you are
grounded to prevent any electrostatic
discharge.