Additional resources, Back cover – Rockwell Automation 2100H-ECPxx CENTERLINE Motor Control Center End Closing Plates User Manual
Page 4
Publication 2100-IN069A-EN-P - February 2009
PN-43054
Supersedes Publication XXXX-X.X.X - Month Year
Copyright © 2009 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
CENTERLINE, Allen-Bradley, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Additional Resources
These documents contain additional information concerning related Rockwell
Automation products.
You can view or download publications at
://literature.rockwellautomation.com
. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
SHOCK HAZARD
Do not energize the MCC unless all end plates are properly installed. Serious injury or
death can occur if end closing plates are missing or improperly installed.
Resource
Description
CENTERLINE MCCs Instruction Manual,
p
Provides information on installing and
connecting your MCC unit.
2
1
3
Torque
3.6 N•m
(32 lb•in)