Rockwell Automation 6176M-xxxx Standard Industrial Monitors User Manual - Manual (Page 15)

Rockwell Automation Publication 6176M-UM001D-EN-P - December 2012 15
Installation Chapter 2
Monitor Dimensions The following illustration and table show dimensions for the panel mount and
VESA mount monitors.
Install the Monitor There are various ways to install the monitors:
• Panel mount
• Rack mount (for only 1950M monitors)
• VESA mount
Review each mounting type and monitor dimensions before installation.
Panel Mounting
Panel mount monitors are installed directly into a panel with mounting clips.
The number of clips varies by model.
Table 1 - Monitor Dimensions
6176M Model Mount A (height) B (width) C (depth) Panel Cutout Height Panel Cutout Width
1550M Panel 309 mm (12.3 in.) 410 mm (16.1 in.) 50 mm (2.0 in.) 285.6 mm (11.24 in.) 386.6 mm (15.22 in.)
VESA 282.6 mm (11.0 in.) 383.6 mm (15.0 in.) 50 mm (2.0 in.) — —
1750M Panel 356 mm (14.0 in.) 452 mm (17.8 in.) 53 mm (2.1 in.) 329.5 mm (12.97 in.) 424 mm (16.69 in.)
VESA 326.5 mm (12.9 in.) 421 mm (16.6 in.) 53 mm (2.1 in.) — —
1950M Panel 399.3 mm (15.7 in.) 482.6 mm (19.0 in.) 58 mm (2.3 in.) 363.5 mm (14.31 in.) 449.6 mm (17.70 in.)
VESA 357 mm (14.1 in.) 444 m (17.5 in.) 58 mm (2.3 in.) — —
C B
C B
1750M Panel Mount Shown 1750M VESA Mount Shown
A A
Cat. No. Monitor Model Mounting Clips
6176M-15PN, 6176M-15PT 1550M 10
6176M-17PN, 6176M-17PT 1750M 10
6176M-19PN, 6176M-19PT 1950M 12
Cat. No. Description
6189V-MCLPS2 Replacement mounting clips (12)