Change monitor settings with osd, General osd menu navigation guidelines – Rockwell Automation 6176M-xxxx Standard Industrial Monitors User Manual User Manual
Page 28
28
Rockwell Automation Publication 6176M-UM001D-EN-P - December 2012
Chapter 3
Display Configuration
Change Monitor Settings
with OSD
Use the OSD buttons on the back of your monitor to change your monitor’s
settings.
The OSD contains similar menu functions for each monitor. The menus are icon
driven.
General OSD Menu Navigation Guidelines
See
How to Use the OSD Buttons on page 26
for where the Menu/Return and
arrow buttons are located. See any of the six OSD main menu tabs starting on
for where the Back
and Exit
buttons are located.
• Press the Menu/Return
button to do the following:
– Open the OSD main menu.
– Activate the highlighted function.
– Activate a highlighted sub-function.
• Press the arrow
buttons to do the following:
– Move between the function icons.
– Make your changes.
– Select the sub-function if an icon has more than one sub-button.
• As you move from one function to the other, the function menu changes
to represent the correct icon.
• Press the Back
button once to return to the OSD main menu where
you can select another function.
• Press the Exit
button to exit the OSD main menu.