Rockwell Automation Discrete Machine Performance Solution - Manual (Page 56)

D ISCRETE M ACHINE P ERFORMANCE S OLUTION U SER ’ S G UIDE
50
• • • • •
Generating the application
After all of the configuration steps described in this chapter are completed, the saved site
configuration data must be used to generate the Discrete MPS system configuration.
To complete the customization process, run the Discrete MPS Configurator on the
VersaView Integrated Display Computer:
1. If the configuration data has not already been loaded, open the saved configuration
file. Make sure the file is accessible through the network or use a floppy disk to move
the configuration file to the Discrete MPS VersaView Integrated Display Computer.
Refer to “Main screen” on page 36 for a description of performing basic file
operations.
2. Click the Generate button to begin the generation of the Discrete MPS system
configuration. The Configurator will prompt you to run the Rockwell Software
RSView software and have the Discrete MPS application loaded.
Discrete.book Page 50 Wednesday, December 8, 2004 2:22 PM