Rockwell Automation 2090-K6CK-D15MF Kinetix 6000 to Gettys XP Motor 2-Pole Resolver - Manual

Installation Instructions
Wiring Kinetix 6000 Servo Drives to Elwood
High Performance Motors SX-Series
Two-pole Resolver-based Motors
About This Publication
This publication provides tables for wiring the flying leads from an Elwood High Performance
Motors SX-Series with a two-pole resolver to a Kinetix® 6000 drive.
Contact Elwood ( http://www.elwood.com/sx ) for motor installation instructions.
Wiring the Power Connections
IMPORTANT Be sure to correctly connect shields and ground the motor frame.
Kinetix 6000 Drive Elwood Sx-Series Power
Terminal Wire Color Signal
U Black Phase A
V White Phase B
W Red Phase C
Ground Green/Yellow Ground
Wire to M F-16 (1)
(1) Terminate with a low-profile connector kit (catalog number 2090-K6CK-D15M F).
Blue Over Temp
Wire to M F-17 (1) Blue Over Temp