Rockwell Automation 2080-LC30-24QWB_24QVB_24QBB Micro830 24 Point Programmable Controllers - Manual (Page 14)

14 Micro830 24 Point Programmable Controllers
Publication 2080-IN004B-EN-P - April 2014
Isolation voltage 250V (continuous),
Reinforced Insulation
Type, Outputs to Aux
and Network, Inputs to
Outputs
Type tested for 60 s @
720V DC, Inputs to Aux
and Network, 3250
V DC Outputs to Aux
and Network, Inputs to
Outputs 50V (continuous), Reinforced Insulation Type, I/O
to Aux and Network, Inputs to Outputs
Type tested for 60 s @ 720V DC, I/O to Aux and
Network, Inputs to Outputs
Pilot duty rating C300, R150 N.A.
Insulation stripping
length 7 mm (0.28 in)
Enclosure type
rating Meets IP20
North American
temp code T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation
Wiring and Grounding Guidelines, publication
1770-4.1 .
Input Specifications
Attribute High-Speed DC Input
(Inputs 0...7) Standard DC Input
(Inputs 8 and higher)
Number of inputs 8 6
Voltage category 24V DC sink/source
Input group to backplane
isolation Verified by one of the following dielectric tests: 1,414V DC for 2 s
75V DC working voltage (IEC Class 2 reinforced insulation)
On-state voltage range 16.8…26.4V DC @ 65°C (149°F)
16.8…30.0V DC @ 30°C (86°F) 10…26.4V DC @ 65°C (149°F)
10…30.0V DC @ 30°C (86°F)
Off-state voltage, max 5V DC
Off-state current, max 1.5 mA
On-state current, min 5.0 mA @ 16.8V DC 1.8 mA @ 10V DC
On-state current, nom 8.8 mA @ 24V DC 8.5 mA @ 24V DC
On-state current, max 12.0 mA @ 30V DC
General Specifications
Attribute 2080-LC30-24QWB 2080-LC30-24QVB 2080-LC30-24QBB