Rockwell Automation 2080-LC30-24QWB_24QVB_24QBB Micro830 24 Point Programmable Controllers - Manual (Page 8)

8 Micro830 24 Point Programmable Controllers
Publication 2080-IN004B-EN-P - April 2014
Status Indicators
Mount the Module
Most applications require installation in an industrial enclosure to reduce the effects of electrical
interference and environmental exposure. Locate your controller as far as possible from power
lines, load lines, and other sources of electrical noise such as hard-contact switches, relays, and
AC motor drives. For more information on proper grounding guidelines, see the Industrial
Automation Wiring and Grounding Guidelines, publication
1770-4.1 .
Mounting Dimensions and DIN Rail Mounting
Module Spacing
Maintain spacing from objects such as enclosure walls, wireways and adjacent equipment. Allow
50.8 mm (2 in.) of space on all sides for adequate ventilation, as shown. An exception to this
spacing guideline is allowed for the side at which you are connecting the optional power supply,
2080-PS120-240VAC.
Input status
Run status
Force status
Power status
Fault status
Output status
Serial communications
status
45017
45018
Mounting dimensions do not include mounting feet or DIN rail latches.
150 mm (5.91 in.)
80 mm (3.15 in.)
90 mm (3.54 in.)