Rockwell Automation 2706 Dataliner DL40 Installation Instructions - Manual (Page 15)

Dataliner DL40 Message Display 15
Fuse Information
The DL40 display utilizes two fuses, one on L1 and the other on L2N. Both fuses
use the following replacement types:
Fuse Type
USA 1.25 amperes, 250V ac, Type MDL
European 1.5 amperes, 250V ac, Type GMC
!
ATTENTION: Neutral fusing. Disconnect all electrical
power from the DL40 before replacing either fuse.
AC Power Connections
Connection
120/240V ac, 3 Wire
U.S. Color Code
120/240V ac, 3 Wire
European Harmonized Color Code
L1 Black (Line) Brown (Line)
L2N White (Neutral) Blue (Neutral)
P.E. Green (Earth Ground) Green/Yellow (Protective Earth)
Additional Information
For additional information on communication port wiring and display
configuration, refer to the Dataliner DL40 User Manual (Publication 2706-807).