Required tools – Rockwell Automation 2706 Dataliner DL40 Installation Instructions User Manual
Page 4
Advertising
![background image](/manuals/580601/4/background.png)
Dataliner DL40 Message Display
4
Allow enough space within the enclosure for adequate ventilation. Consider heat
produced by other devices in the enclosure. The ambient temperature around the
display must be between 0
_ and 60_C (32_ and 140_F).
Make provisions for accessing the back panel of the display for wiring,
maintenance, installing a memory module, and troubleshooting.
Required Tools
Other than the tools required to make the panel cutout, the tools required for
installation are:
•
3/8 inch deep well socket wrench
•
small slotted screwdriver
•
torque wrench (in. / lbs).
Advertising