Rockwell Automation 8720MC Control Board Installation Instructions - Manual (Page 4)

4 8720MC Control Board
Publication 8720MC-IN003A-EN-P — January 2005
Before You Remove the 8720MC Control Board
Figure 1
8720MC Control Board Features
ATTENTION
This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. You are required to
follow static control precautions when you install,
test, service, or repair this assembly. If you do not
follow ESD control procedures, components can be
damaged. If you are not familiar with static control
procedures, refer to Allen-Bradley publication
8000-4.5.2, Guarding Against Electrostatic Damage
or any other applicable ESD Protection Handbook.
ATTENTION
To avoid shock hazard or personal injury, assure that
all power is removed from the system module before
proceeding. This system may have multiple sources of
power. More than one disconnect switch may be
required to de-energize the system.
8720MC
Control
Board
P1 P4 P5
TB1
Shield
Clamps
1 2
Customer
Connections
SERCOS interface  Connectors
Human Interface
Module (HIM)
SCANport/DPI Connector
Thermal Switch
Connector Ribbon Cable
Connector
Control Board Screws (6)