Rockwell Automation 2100 Receiving, Handling, and Storing MCCs - Manual

1
Instructions
Receiving, Handling, and Storing Motor
Control Centers
Receiving
1. Upon delivery of the motor control center, inspect the shipment for lost
items and any damage that may have occurred during transit. If the
package appears to be damaged, it may be necessary to unpack the
equipment and inspect it for further damage.
2. In the event that there is evidence of loss or damage, the buyer must
follow the procedure outlined below:
• Note on the delivery receipt that the equipment being received is
damaged.
• Contact the carrier that made the delivery and schedule an
inspection.
• Inform the local Rockwell Automation representative that the
equipment is damaged.
• Retain all product packaging for review by the carrier’s inspector.
For further assistance, contact Rockwell Automation support at (440)
646-5800. Navigate through the call tree by selecting option 2 for
Allen-Bradley products, option 5 for motor control centers, and then option 1
for hardware support.
IMPORTANT
Delivery of equipment from Rockwell Automation to the
carrier is considered delivery to the buyer. The carrier
becomes liable for any damage that occurs during transit. It
is then the buyer’s responsibility to notify the proper party
if damage is found. The buyer may forfeit any right to
recovery for loss or damages by failing to comply with the
following steps.