Rockwell Automation 2100 Receiving, Handling, and Storing MCCs - Manual (Page 4)

Publication 2100-IN040B-EN-P - October 2002
4 Receiving, Handling, and Storing Motor Control Centers
1. Attach rigging to lifting means.
2. Do not pass ropes or cables through the support holes in the lifting
angle. Use slings with load-rated hooks or shackles.
3. Select or adjust the rigging lengths to compensate for any unequal
weight distribution of the load and support the motor control center in
an upright position.
4. Reduce tension on the rigging and compression on the lifting angle by
ensuring the angle between the lifting cables and vertical plane does not
exceed 45
° .
ATTENTION
!
Ensure that the load rating of the lifting device is
sufficient to handle the load safely. Refer to the
shipping weights on the packing slip enclosed in the
shipment.
ATTENTION
!
Some motor control centers contain heavy, mounted
equipment, such as transformers, that could be
adversely affected if tilted.