European union directive compliance, Backlight assembly disposal – Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual User Manual
Page 18

18
Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
Chapter 2
Installing the Monitor
European Union Directive
Compliance
This product meets the European Union Directive requirements when installed
within the European Union or EEA regions and has the CE mark. A copy of the
Declaration of Conformity is available at the following website:
Certification.
Backlight Assembly Disposal
ATTENTION: This product is intended to operate in an industrial or
control room environment, which uses some form of power isolation
from the public low-voltage mains. Some computer configurations may
not comply with the EN 61000-3-2 Harmonic Emissions standard as
specified by the EMC Directive of the European Union. Obtain permission
from the local power authority before connecting any computer
configuration that draws more than 75 W of AC power directly from the
public mains.
ATTENTION: The backlight assembly in this unit contains mercury. At
the end of its life, this equipment should be collected separately from
any unsorted municipal waste.