Rockwell Automation 2706-PNR2 InView P22R Message Display Adapter Plate - Manual

Publication 2706-IN020A-EN-P - January 2004
Installation Instructions
English Section
InView P22R Adapter Plate
(Catalog Number 2706-PNR2)
Overview
For additional information, refer to:
•
InView User Manual, publication 2706-UM016.
•
InView P22R Installation Instructions, publication 2706-IN014.
•
The InView publications can be found in the Manuals-On-Line section of
www.ab.com or theautomationbookstore.com.
Adapter Plate Mounting
The following steps provide instructions for installing the adapter plate in an
existing DL40 Plus four-line display panel opening.
1. Drill the appropriate mounting holes in the enclosure or panel.
Drill Holes
0.25 in (6.35 mm)
Drill Holes
0.25 in (6.35 mm)
2. Remove the six mounting nuts from the hardware bag provided with the
plate.
3. Position the adapter plate (2706-PNR2) in the panel or enclosure mounting
hole.
4. Install nuts and alternately tighten the nuts to a torque of 0.904 Nm (8 in-lb).