Specifications, 2090-cpbm7df-xxafxx specifications, 2090-cpwm7df-xxafxx specifications – Rockwell Automation 2090-CPWM7DF-xxAFxx Continuous Flex Power Cables with DIN SpeedTec Connector Installation Instruc User Manual
Page 7
Continuous Flexible Power Cables Installation Instructions 7
Publication 2090-IN025A-EN-P — October 2009
Specifications
These specifications provide information that is useful when installing a cable.
Additional specifications for each cable are available in the Kinetix Motion Control
Selection Guide, publication
.
2090-CPBM7DF-xxAFxx Specifications
2090-CPWM7DF-xxAFxx Specifications
Attribute Value
Wire Size
16 AWG
14 AWG
Diameter
12.5 mm (0.5 in.)
13.7 mm (0.5 in.)
Bend Radius
1
1
Apply the multiplier for operational (12 x dia.) and static (10 x dia.) bend radius to cables with a different diameter. Refer to
the diagram to locate the areas for flex (operational), and static (installation) bend areas.
Flex Area
150 mm (6.0 in.)
165 mm (6.5 in.)
Installation Areas
2
2
The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable. Secure this area with a rigid
mount that prevents the cable from flexing where it connects to other components.
125 mm (5.0 in.)
137 mm (5.5 in.)
Attribute Value
Wire Size
16 AWG
14 AWG
Diameter
9.7 mm (0.4 in.)
10.4 mm (0.4 in.)
Bend Radius
1
1
Apply the multiplier for operational (12 x dia.) and static (10 x dia.) bend radius to cables with a different diameter. Refer to
the diagram to locate the areas for flex (operational), and static (installation) bend areas.
Flex Area
120 mm (5.0 in.)
125 mm (5.0 in.)
Installation Areas
2
2
The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable. Secure this area with a rigid
mount that prevents the cable from flexing where it connects to other components.
100 mm (4.0 in.)
105 mm (4.0 in.)