Rockwell Automation 2727-T7P30D1F MobileView Tablet T750 User Manual - Manual (Page 74)

Publication 2727-UM001D-EN-P - March 2004
5-20 Communications Configuration
3. Click the Change Password button. The Change Password
screen appears.
4. Enter the current password in the Existing Password field.
5. Enter a new password in the New Password Field.
6. Re-enter the new password in the Confirm New Password field.
7. Click OK to save your new password or click Cancel to exit the
screen without changing the password. If your password is
accepted, the following message appears, “Password
Successfully Changed.”
8. Click OK to exit the utility.
Disabling Static WEP
Follow the steps below if you ever need to disable static WEP.
1. Double-tap the Cisco ACU icon or select
Start/Programs/Cisco/Aironet Client Utility. The ACU screen
appears.
2. Select WEP under Property. Select Disabled from the list of
options in the Value box to disable WEP.
3. Tap OK to save your changes and to exit the utility.
TIP
Passwords are case sensitive and can contain
up to 256 alphanumeric characters.