Rockwell Automation 6189V-35HDDST160 Hard Disk Drive - Manual (Page 10)

10 Hard Disk Drive (HDD)
Publication 6177R-IN002B-EN-P - November 2009
Post-installation Procedure
Perform this post-installation procedure after installing or removing a hardware component.
1. Make sure all components are installed according the step-by-step instructions.
2. Make sure that no loose tools or parts are left inside the computer.
3. Reinstall any expansion boards, peripherals, board covers, and system cables that have
been previously removed.
4. Reinstall the side cover if necessary.
5. Connect all external cables and power to the computer.
6. Press the power switch to turn on the computer.
Additional Resources
For additional information on the VersaView Light Industrial non-display computers, refer to
these publications.
You can view or download publications at http://www.literature.rockwellautomation.com. To
order paper copies of technical documentation, contact your local Rockwell Automation
distributor or sales representative.
Related Publications
Publication Publication Number
User Manual 6177R-UM001
Installation Instructions 6177R-IN001