Rockwell Automation 6189V-35HDDST160 Hard Disk Drive - Manual (Page 6)

6 Hard Disk Drive (HDD)
Publication 6177R-IN002B-EN-P - November 2009
Install or Replace the SATA Hard Disk Drive (HDD)
To install or replace an HDD drive:
1. Unlock the front door, if necessary, and open it to access the HDD bays.
On the 1450R computer, the HDD is secured behind the front door.
2. Remove the HDD carrier from the selected bay.
a. Loosen the two captive thumbscrews of the HDD carrier.
b. Pull out the HDD carrier from its bay.
ATTENTION
Mechanical shock can damage a HDD. Do not drop or bump the HDD.
TIP All SATA hard disk drive accessories ship with the drive formatted in a single
partition NTFS format.