Rockwell Automation 2090-CPxxx Standard Power Cables with SpeedTec DIN Connector Type 923 - Manual

Installation Instructions
Standard Power Cables with
SpeedTec DIN Connector Type 923
Catalog Number 2090-CPBM7DF-12AAxx, 2090-CPBM7DF-14AAxx,
2090-CPBM7DF-16AAxx, 2090-CPWM7DF-12AAxx,
2090-CPWM7DF-14AAxx, 2090-CPWM7DF-16AAxx
About Standard Power Cables
Standard motor power cables, with or without brake connections, have a 23 mm (0.9 in.)
SpeedTec DIN connector at the motor end, and flying leads at the drive end. These cables can be
bent or reformed during installation or maintenance, but should not be used in a continuous flex
operation.
Topic Page
Important User Information 2
Before You Begin 3
Install Cables 4
Connector Pinout Diagrams 6
Specifications 7
Additional Resources 8