Rockwell Automation GV3000 Precharge Board Replacement Instructions - AC Input, Frames 5 and 6 - Manual (Page 2)

2
Publication RA-IN012A-EN-P – October, 2004 P/N 354787-P01
Copyright © 2004 Rockwell Automation, Inc. All rights reserved. Printed in USA.
3
A
B
C x4
Frame 6
A. Remove the screws securing
the Precharge Board
protective shield. Remove
shield.
B. Label and remove the three
cables from the board.
C. Remove the four screws
securing the board. Remove
the board.
D. Re-assemble in reverse order
using the new board. All
screws should be tightened to
3.2 N-m (28 lb.-in.).