Rockwell Automation CHPS-250 Linear Stage Installation - Manual (Page 32)

32 Rockwell Automation Publication CHPS-UM001D-EN-P - July 2014
Chapter 4 Mounting the Stage
4. Align the stage on the mounting surface, and insert the correct number of
mounting bolts. Refer to CHPS-Series Stage Dimensions beginning on
page 77 for detailed mounting dimensions.
5. Secure the stage by using all mounting holes. Torque bolts to the values
shown in the Mounting Fastener Options table on page 29 .
Mount Your Application
Mount your application to the slide by using the following bolts and torque
values:
Cat. No. Bolt Torque
N•m (lb•in)
CHPS-x6xxxx-xLMxxx M6 3.2 (48)
CHPS-x8xxxx-xLMxxx M8 10.1 (90)
CHPS-x9xxxx-xLMxxx M8 10.1 (90)