Rockwell Automation MinPak Plus DC Drive Field Supply Kit for NRG 14C228 User Manual
Product description
Reliance and MinPak are trademarks of Rockwell Automation.
© 1998 Rockwell International Corporation
Field Supply Kit
for Non-Regenerative MinPak Plus DC Drives
Model Number 14C228
Instruction Manual D2-3380
Product Description
The Field Supply kit provides field excitation for shunt-wound DC motors used with 1/4 to 1-1/2 HP
non-regenerative MinPak™ Plus DC drives. The kit is an assembly consisting of a terminal block, a field power
cube, two wiring harnesses, an Auxiliary Mounting Bracket (M/N 14C209), and mounting hardware.
The user must provide appropriate Field Supply wiring to the motor, based upon the motor’s field rating.
The contents of the Field Supply kit are listed in table 1.
!
ATTENTION: Only qualified electrical personnel familiar with the construction and operation of
this equipment and the hazards involved should install, adjust, operate, and/or service this
equipment. Read and understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in severe bodily injury or loss
of life.
Table 1 – Contents of the Field Supply Kit
Description
Quantity
Part Number
Auxiliary Mounting Bracket
1
608886-23A
Field Supply Power Cube
1
701819-12AD
Terminal Block 3TB
1
49455-93A
Wire Harness 51/52
1
608813-77R
Wire Harness F1/F2
1
608813-73R
Mounting Screws, 8-32 X 3/8
2
601741-62C
Auxiliary Mounting Bracket Kit Instruction Manual
1
D2-3379
Field Supply Kit Instruction Manual
1
D2-3380