Rockwell Automation MinPak Plus DC Drive Field Supply Kit for NRG 14C228 - Manual (Page 3)

Field Supply Kit for Non-Regenerative MinPak Plus DC Drives 3
.
Step 7. Verify that the wiring of the Field Supply kit is correct and all connectors are securely fastened.
Step 8. Reattach the cover to the drive.
Step 9. Apply power and test the operation of the drive.
This completes the installation of the Field Supply kit.
Figure 1 – Connecting the Field Supply (Full-wave)
Figure 2 – Connecting the Field Supply (Half Wave)
F1 F2
To F1, F2 on motor
AC
AC
+ –
3TB
2TB
51 52
F1 F2
To F2 on motor AC
AC
+ –
3TB
2TB
51 52
To F1 on motor