Rockwell Automation GMLC Installation Manual User Manual
Rockwell Automation Equipment
System Requirements
1
Publication GMLC- 5.3-CDI - March, 1999
System Requirements
GML Commander is designed to run on Windows 95 or
Windows NT 4.0™. To ensure that GML Commander works
correctly, we recommend, at minimum, the following hardware
and software:
•
IBM compatible PC with a 486 or higher microprocessor
(Pentium recommended)
•
Windows95/Windows NT 4.0 operating system (or higher)
•
8 MB RAM (16 MB recommended)
•
10 MB hard disk space
•
VGA monitor running in standard 640 x 480 resolution
(SVGA 600 x 800 resolution recommended)
•
One 3.5 inch high-density diskette drive (1.44 MB) if
installing GML Commander from diskettes
•
One CD ROM drive if installing GML Commander from
CD ROM
•
Windows-compatible mouse with mouse driver
•
One serial port (com1, com2, com3, or com4) to
communicate with the controller
•
A second serial port if using a serial mouse