Rockwell Automation T8110B Trusted Industrial Control System - Manual (Page 2)

SDS-8110
Trusted
TM Industrial Control System
Trusted TM TMR Processor-T8110B
ICS Triplex
Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development and improvement.
Specifications are subject to change
without notice. For latest information, visit
our Website:-
www.icstriplex.com
BLOCK DIAGRAM
ELECTRICAL SPECIFICATION
Voltage Range 20 to 32V dc
Maximum Load 75W
Heat Dissipation 70W
Use With Chassis T8100
Processor Clock 100MHz
Memory Type And Size
DRAM
EPROM
FLASH
NVRAM
16MB EDO 60ns
512kB
2MB
128kB
I/O Interface Triple redundant Inter-Module Bus
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
241mm x 90mm x 300mm
(9.5ins x 3.6ins x 11.8ins)
Weight:
2.71kg (5.95lbs)
ENVIROMENTAL
Operating Temperature:
-5
°C to 60°C
(23 °F to 140°F)
Operating Humidity:
5 to 95%, non-condensing
Vibration:
10 to 57Hz
±0.075mm
57 to 150Hz 1.0g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds