Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manual (Page 15)

XM Dynamic Measurement Module 15
Publication ICM-IN002A-EN-P - March 2009
Specifications
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial
Automation Wiring and Grounding Guidelines, publication
1770-4.1 .
Flashing Yellow Tachometer fault other than a transducer
fault (for example no pulse received).
Flashing Red Tachometer signal DC bias is not within
the DC Low and High Limits.
Setpoint Multiplier Off Alarm Limit Multiplier is not in effect.
Solid Yellow Alarm Limit Multiplier is in effect.
Relay Off Virtual relay is not activated.
Solid Red Virtual relay is activated.
XM Dynamic Measurement Module - 1440-DYN02-01RJ
Attribute Value
Enclosure Type Rating None (open-style)
Input Voltage (mounted in the 1440-TBS-J) 24V DC
Current Draw Max 250 mA
Output Voltage -24V DC, 60 mA Max
Isolation Voltage Not Rated (Class 2 power source required)
No isolation between I/O or backplane
Wire Size Determined by installed terminal base
Wiring Category (1) 2 - on signal ports
1 - on power ports
2 - on communications ports
North American Temp Code T4A
IEC Temp Code T4
Indicator State Description