Rockwell Automation Flex/WebPak 3000 Version 1.x Drive Regulator Board Installation, M/N 920WK0011 - Manual (Page 8)

8 Regulator Board Installation Instructions for WebPak 3000 Version 1.x Drives
Figure 3 – Removing the Ribbon Cable Connectors
Figure 4 – Removing the Grounding Harness Connectors
J7 Ribbon Cable
J6 Ribbon Cable
J5 Ribbon Cable
J25 Cable
Connector
To Power Supply PCB (J17)
on backside of carrier
To OIM Ground Stud
(Do not disconnect)
(Do not disconnect)
F1 F2
F3 F4