Rockwell Automation Emonitor with an Oracle Multi-User Database - Manual (Page 25)

3 • I NSTALLING E MONITOR
21
•
•
•
• •
3. On the Response dialog, select Scheduled time/date/frequency.

For the Storage Limit Updater, click Next and then skip to step 7.

For the Online Import Event, select File change notification and click Settings.
4. Click Add File. Select the UD directory under your Emonitor program directory. In
the File name box, enter *.ulf. This tells Scheduler to look for unload files in the
unload directory. Click Open.
5. The unload files appear in the Monitored Files list. Click OK to continue.
6. Click Next on the Response dialog.
7. On the Events dialog, click Add Event.
8. Enter the Executable file and the Command line using the following guidelines, then
click OK. This example used the default Emonitor installation directory. If you
installed Emonitor in a different directory, use the path to your Emonitor program
directory.
For Online Import Event:
Executable file: C:\Program Files\Rockwell Software\
Emonitor\didaemon.exe
Command line: C:\Program Files\Rockwell Software\
Emonitor\odonline.edi
For Storage Limit Updater:
Executable file: C:\Program Files\Rockwell Software\
Emonitor\stglimit.exe
Command line (must be one of the following):

/all - Remove all measurement data, system event log data and alarm event log
data outside the storage limits.
 “/list:list name” - Remove measurement data which are saved to a list
with “list name” and are outside the storage limits. Note: “list name” is case
sensitive, and must be enclosed in quotes if the list name contains a space.

/alarm - Remove alarm event log data outside the storage limits.

/system - Remove system event log data outside the storage limits.
9. Click Next to continue.
10. On the Frequency dialog, set the Date and Time you want to launch the profile. Click
Finish.